Model Number |
Carrier |
Thickness (mm) |
adhesion (kg/25mm) |
Application |
Protective film |
SKY-401 |
PE transparent |
0.06 |
Micro stick |
Hight transparency and
soft, commonly used in plastic, lenses, high-quality finish, copper, stainless
steel surface protection |
SKY-402 |
PE transparent |
0.05-0.06 |
Micro stick |
slightly Transparency,
pan-silver surface, soft, commonly used in plastic, lens, plastic, PVC and
other surfaces |
SKY-403 |
PE transparent light
green |
0.05 |
Low viscosity |
Membrane stripes, spots,
viscosity stability, and no excess glue, suitable for plastic, metal surface
protection |
SKY-404 |
PE transparent light
green |
0.05 |
Low viscosity |
smooth surface
, no pattern and no point, viscosity stability, no excess glue, widely
used in electronic plastic, lenses, metal material surface protection |
SKY-405 |
PE transparent |
0.06 to 0.07 |
The stick |
Membrane surface is
smooth, easy-type and slightly Obscure, with strong electrostatic, than the
soft, viscous stability, surface protection commonly used in the Nameplates
signs, plastic, metal, etc. |
SKY-406 |
PE transparent |
0.05 to 0.1 |
Low viscosity in
hyperviscosity |
Hight transparency, and
sometimes spotted on the surface, sex is a little soft, viscosity stability,
commonly used in metal & plastic protection |
SKY-407 |
PE transparent |
0.06 |
Low viscosity |
Transparency is good,
sex is a little soft, sticky, commonly used in metal & plastic protection |
SKY-408 |
PE transparent, yellow,
blue, green |
0.05 to 0.12 |
Low viscosity in
hyperviscosity |
Obvious rules of the
membrane stripes, transparency in general, softer, viscosity stability, no
excess glue, suitable for circuit boards, matte metal and plastic surfaces |
SKY-409 |
PE + EVA flour black |
0.07 to 0.10 |
Hyperviscosity |
Separate into a mist on
the sticky, difficult to pull the roll, but the viscosity stability, weathering
resistance, applies to stainless steel, sheet metal, aluminum protection |
SKY-410 |
PE + EVA flour black |
0.05 to 0.12 |
The stick to the high
viscosity |
On the stick to separate
into a non-mist, rolls easy to pull, but the viscosity stability and resistance
to weathering, applies to stainless steel, sheet metal, aluminum protection |
SKY-411 |
PE milky white |
0.05 to 0.14 |
Low viscosity to high
viscosity |
Viscosity stability,
applies to stainless steel, building materials, aluminum protection |
SKY-412 |
PVC white, yellow |
0.08 ~ 0.12 |
Hyperviscosity |
Soft opaque, viscous
strong and long-lasting protection against ultraviolet radiation, marble,
aluminum doors, glass matte surface protection |